Mortar Hose - WAGNER Plast Coat 830 Mode D'emploi

GB
SAFETY REGULATIONS

Mortar hose

Danger of injury through leaking high-
pressure hose. Wear and tear and links as
well as usage that is not appropriate to the
purpose of the device can cause leakages
to form in the mortar hose. Liquid can be
injected into the skin through a leakage.
used.
Avoid sharp bends and folds: the smallest bending radius is
about 80 cm.
Do not drive over the mortar hose. Protect against sharp ob-
jects and edges.
Never pull on the mortar hose to move the device.
Do not twist the mortar hose.
be tripped over.
The risk of damage rises with the age of the
mortar hose.
Wagner recommends replacing mortar hoses
32
Setup on an uneven surface
the diagram below to prevent it slipping.
-
Plast Coat 830