Filter Assembly - Procopi Piscines Bois TROPIC OCTO Notice De Montage

»
ASSEMBLY INSTRUCTIONS/ OCTO & OCTO +

fILTER ASSEMBLY

> >
Check that the drain plug and its o-ring are in posi-
tion.
hand tighten only
Put the protective cap on the top of the collector
tube and push it into the hole in the middle of the
collector plate.
Pour the sand slowly and gently into the filter tank
and spread it out using your hand.
66
Place the collector plate in the base of the filter
tank. Check that it is level.
Engage the diffuser in filter lid and rotate it anti-
clockwise to lock it in position.
CAUTION! The sand should not reach higher than
2/3 of the filter tank height.