Procopi Piscines Bois TROPIC OCTO Notice De Montage page 50

OCTO + POOLS
> >
ABOVE-GrOUND CONFIGUrATION ONLY. ADVICE AND INSTrUCTIONS FOr IN-GrOUND Or PArTIALLY
SUNKEN CONFIGUrATIONS ArE ILLUSTrATED AT ThE END OF ThIS DOCUMENT.
Trace out site of the pool and clear the ground of plants, grass and other miscellaneous objects.
Next, level and smooth the surface using a spade, rake and a pickaxe (if necessary). Make sure that you
smooth out any bumps or rough areas that could damage the underlay, or more seriously, the liner.
Make sure that the bearing surface is completely flat and perfectly level.
Once the ground has been prepared, use string to mark out the longitudinal axis (A1) of your pool and
then the transversal axis (A2) perpendicular to the axis A1.
2
Footprint of the OCTO + L.540 x W.330cm
50
4
Footprint of the OCTO + L.460 x W. 338cm
Given the particularities of the 460+ pool, some
assembly steps will be illustrated separately.
These differences will be clearly marked in this
document so that you can easily identify the
illustrations specific to this pool.
3
Footprint of the OCTO + L.640 x W.400cm
»
ASSEMBLY INSTRUCTIONS/ O