Procopi Piscines Bois TROPIC OCTO Notice De Montage page 58

»
ASSEMBLY INSTRUCTIONS/ OCTO & OCTO +
ASSEMBLY Of ThE OCTO + 460 POOL
> >
INSTALLATION Of ThE CRADLES
The pool structure is mounted in two stages:
-Stage 1, excavation of the site and installation of the cradles designed to reinforce the lateral walls. A cradle
comprises a cross beam ref 27414070, vertical posts ref 27414071 and metallic plates to be bolted together.
-Stage 2, assembly of the wooden structure and fitting of the additional items (liner, coping, etc.).
We recommend that the pool structure be assembled by two people.
Before you begin, familiarise yourself with the nomenclature page (enclosed with the Waterproofing kit) and the
main exploded view (at the end of this document) that corresponds to your pool.
32
33
34
58
You will need to dig shallow trenches
on either side of the axis A2 to hold
the cradles. Make sure that these are
parallel to each other and to the A2
regular and sized to hold the cradles in
the right position.
Lay the cradle components out beside the trench
and bolt them together (bag U) that you will find in
the kit separate from the main bag of screws, nuts
and bolts..
Once the cradles have been assembled, place them
in the trenches and block them in position using wet
compacted sand if necessary.
During this operation, check that the cradles are
level, straight, aligned and parallel.