Publicité
Les langues disponibles
Les langues disponibles
rain. Protection rating IP21S is applicable in this case.
Protect your eyes using the appropriate protective glasses
„
(DIN level 9–10), which are fastened to the supplied welding
mask. Wear gloves and dry protective clothing that are free of oil
and grease to protect the skin from exposure to ultraviolet radiation
of the arc.
„
pipes.
Please note:
The light radiation emitted by the arc can damage eyes and cause
„
burns to the skin.
Arc welding creates sparks and drops of melted metal.
„
The welded workpiece starts to glow and remains hot for a relatively
long period of time. Therefore, do not touch the workpiece with
bare hands.
Arc welding can cause vapours to be released that may be hazardous
„
to health. Be careful not to inhale these vapours.
Protect yourself from the harmful effects of the arc and keep people
„
that are not involved in the work away from the arc, maintaining a
distance of at least 2 m.
ATTENTION!
During the operation of the welder, other consumers may experience
„
problems with the voltage supply depending on the network condi-
tions at the connection point. In case of doubt, please contact your
energy supply company.
During the operation of the welder, other devices may malfunction,
„
e.g. hearing aids, cardiac pacemakers, etc.
z Potential hazards during electric arc welding
There are a series of potential hazards that can occur during electric
arc welding. It is therefore particularly important for the welder to
observe the following rules to avoid endangering him/herself and
others and to prevent damage to people and the device.
Work on the mains voltage side, e.g. on cables, plugs, sockets
„
etc., may only be carried out by qualified electricians according to
national and local regulations.
Work on the mains voltage side, e.g. on cables, plugs, sockets
„
etc., may only be carried out by qualified electricians according to
national and local regulations.
Do not use the welding power source to defrost
GB/IE/NI/CY/MT
11
Publicité
