Bose QUIETCOMFORT SC Mode D'emploi page 44

RESTORE THE HEADPHONES TO FACTORY SETTINGS
A restore to factory settings can clear all settings and return the headphones to their
original out-of-box state. After, the headphones can be configured as if they were
being set up for the first time.
Restoring to factory settings is only recommended if you are having issues with the
headphones, or you have been instructed to do so by Bose customer service.
1. Remove the headphones from the Bluetooth list on your device.
2. Remove the headphones from your Bose account using the Bose app.
NOTE: For more information about how to remove the headphones from your
Bose account using the Bose app, visit: support.Bose.com/QCSC
3. Slide the Power/Bluetooth switch to the right l and hold. At the same time, press
and hold the Action button for 30 seconds.
The status light blinks white. After 30 seconds, the status light blinks amber to
indicate factory settings are being restored (2 to 3 seconds).
When the reset is complete, the status light slowly blinks blue. The headphones
are now in their original out-of-box state.
NOTE: If you're unable to resolve your issue, additional troubleshooting and
support is available at: support.Bose.com/QCSC
TROU B LE S HO OT ING
support.Bose.com/QCSC
|
4 4 E N G
support.Bose.com/QCSC