Siemens SICHARGE D 8EM5907-0AA01-1AA4 Information Du Produit page 92

Repair
7. Loosen the four M6x16 half-round head screws and remove the cover plate from the jib.
Figure 21 Removing the cover plate
①
8. Guide the rope through the recess of the mounting plate to the jib. Pull the rope out over the horizontal guide
between the two vertical guides
Figure 22 Laying the rope
92
③
of the roller cross.
Installation of the cable management system V1.6
②
and
A5E53160522-AC, 05/2024