Publicité
Les langues disponibles
Les langues disponibles
Installing the cable management
②
4.
Place the rope
in the rope clamp in the form shown in the figure.
Figure 13
Positioning the rope and meander pin
③
5.
Place the meander pin
the meander pin faces upwards towards the rope loop.
6.
Join both parts of the cable clamp together. Ensure the correct fit of the meander pin and rope.
Figure 14
Screwing in the cable clamp
7.
Place the M4 nuts in the hex holes. Insert the M4x14 hexagon socket-head screws opposite the nuts. Carefully screw in the cable
clamp.
–
Allen key size 2.5 mm
–
The tightening torque is 3 Nm
88
in the rope loop and in the groove provided in the cable clamp. Make sure that the smooth side of
Installation of the cable management system V1.6
A5E53160522-AC, 05/2024
Publicité
