Publicité
Les langues disponibles
Les langues disponibles
Information signs on the nameplate
Safety sign
Personal protective equipment (PPE)
Personal protective equipment protects you against hazards to your health and safety. Use your personal protective equipment in
accordance with occupational safety guidelines and accident prevention regulations.
When working use the required personal protective equipment, such as:
Safety shoes
•
•
Helmet
•
Safety vest
•
Gloves
•
Protective goggles
The five safety rules for electrical work
The European standard EN 50110-1:2023 "Operation of electrical installations" prescribes safety rules for work on and in
electrical installations. To ensure the safety of persons and property in accordance with the standards, always comply with the
following safety rules.
Securing an electrical system before starting work
Before starting work on and in electrical installations, apply the following five safety rules:
1.
Disconnect at electric distributor
2.
Secure against reconnection at electric distributor
3.
Verify there is no voltage on the electrical distribution board and the workstation.
4.
Ground and short-circuit at the electric distributor
5.
Erect barriers around or cover adjacent live parts
Prepare to switch on again after work is finished
After finishing and checking the work, prepare the restart as follows:
•
Inform persons no longer required that the work is completed and no further work is permitted.
•
Withdraw persons who are no longer required.
•
Remove all tools, equipment and aids that have been used.
Switch on the electrical system again
After finishing the work, rescind the protective measures and switch the system on again:
1.
Remove the short-circuit.
2.
Remove the grounding.
3.
Remove covers or barriers.
4.
Remove the fuse to prevent the system from being switched on again.
5.
Reconnect the system to the power supply.
Installation of the cable management system V1.6
A5E53160522-AC, 05/2024
Meaning
Ensure that only skilled electricians are permitted to install the device. IEC 60417 No. 6182
Read the information contained in the product documentation. IEC 7010 M002
Safety instructions
77
Publicité
