Publicité
Les langues disponibles
Les langues disponibles
Preparation
Tripping and slipping
Keep work areas clean and tidy to prevent tripping and slipping.
Install the rope clamp at the specified point on the rope. If you allow the rope to protrude too far, there is a risk of people
tripping or falling.
Risk of crushing or cuts
During installation, watch out for sharp-edged parts and protruding threaded bolts.
The rope box is a partly completed machine. Only use the rope box if it is professionally installed and covered with the cover.
There is a risk of crushing when pulling in the cable, because the rope box of the cable management is constantly under spring
force.
Fast roll-up
If the rope breaks, it is pulled into the rope box by the spring force. Rapid coiling/whipping of the rope can result in
injuries/burns.
During mounting and disassembly, leave the rope clamp and pulley on the rope until the rope box is fully integrated.
When recycling, only cut the rope directly at the inlet when the roof is installed.
Danger of wrapping around body parts
Do not wrap the rope around body parts. The cable management system retracts the rope with pretensioned spring force. If the
rope is wrapped around body parts it could, for example, strangle a person or crush the body part.
Environmental influences
Protect the cable management system and the charging station from water ingress and other weather conditions.
Preparation
Tools list
Before starting work, ensure that all required tools, materials and lifting gear is available.
•
Stepladder or other approved aids with a working height of at least 2.4 m
•
Allen key size 2.5; 4; 5 mm
•
Hexagon socket bit size 2.5; 4; 5 mm
•
Ring wrench or open-ended wrench size 6; 7; 8; 10; 13; 19 mm
•
Hexagon socket wrench insert long size 6; 7; 8; 10; 13; 19 mm
•
Ratchet for socket wrench insert
•
Torque wrench for 3 to 46 Nm
•
Small cordless screwdriver with bit holder
•
Grease-dissolving cleaning agent
•
Cloth for cleaning
•
Shears
78
Installation of the cable management system V1.6
A5E53160522-AC, 05/2024
Publicité
