Publicité
Assemblage de la
Lamp assembly, switch and top plate
machine
1/ Use the M4x6 screws (DD), M4 nuts (FF) and 4 flat washers (TT) to install the lamp holder (HH) on the
Assembly of the
upper plate (D)
machine
2/ Insert the lamp on its support and tighten it using the nylon cable ties (II)
3/ Install and screw the upper plate (D) with M6x12 screws (AA) and M6 nuts (EE)
4/ Connect the lamp cables to the switch block (F); respect the colors of the wires!
5/ Fix the switch unit on the side, switch facing the operator.
C
S'assurer que les fils sont
bien connectés !
Zorg ervoor dat de draden
goed zijn aangesloten!
¡Asegúrese de que los
cables estén correcta-
mente conectados!
Certifique-se de que os
fios estão conectados
corretamente!
Assicurati che i fili siano
collegati correttamente!
Make sure the wires are
properly connected!
-26-
115102-Manual-A.indd 26
115102-Manual-A.indd 26
Gris
Grey
Gris
Grey
Bleu
Blue
Bleu
Blue
12/10/2023 15:46
12/10/2023 15:46
Publicité
