gomag GO-KS200 Traduction Du Mode D'emploi Original page 28

Explanation of the symbols on the product
Symbols are used in this manual to draw your attention to potential hazards. The safety symbols and the accompa-
nying explanations must be fully understood. The warnings themselves will not rectify a hazard and cannot replace
proper accident prevention measures.
Before commissioning, read and observe the operating manual and safety instructions!
Attention! Failure to observe the safety signs and warning information affixed to the product and
failure to observe the safety and operating manual can result in serious injury or even death.
Wear a safety helmet with face protection or safety goggles and hearing protection.
Wear safety gloves!
Wear sturdy footwear!
It is important to wear protective clothing for hands, forearms, legs and feet.
Do not expose the product to rain. The product may only be stationed, stored and operated in
dry ambient conditions.
Only for two-handed operation.
Warning! Risk of kick-back.
Beware of the kick-back of the product and avoid making contact with the rail tip.
Only carry out maintenance, modification, adjustment and cleaning work when the motor is
switched off and the battery is removed.
Oil tank contents
Weight kg
Blade length
Cutting length
28 | GB www.scheppach.com