Candy CA6 N5G3YTB Mode D'emploi page 22

3.2. FIRST USAGE
When the appliance is switched On for the first time, the initial step is to set time of day, choose
between 13 ampere or 16 ampere, and select sound level.
• SET THE TIME: The display will show the blinking preset time '12:00'. To modify it, hold
the arrows to set the current hour. Press
the minutes. To confirm press
PRESS
• AMPERAGE:
By default, the oven is set to work with higher power suitable for households with
more than 3 kW (16 A). If your home has lower power, you can change this setting to
setting affects how quickly the oven heats up. Choosing the higher option (16A) means it heats up
faster (because the power absorption is increased). On the display, you'll see two choices: 13A and
16A. Select your preferred one by using the arrows. To confirm press
NOTE:
The option to set the amperage is only available during the initial installation. To modify
the set amperage, please refer to the post-installation instructions.
• BRIGHTNESS: The display shows the symbol "brig". The numbers represent the level of brightness
intensity, editable using the arrows. To confirm press
.
SET
TIME
SET
AMPERAGE
SET
BRIGHTNESS
EN 22
to confirm hours. Follow the same procedure to set
SET
TIME
.
and use
PRESS
PRESS
TO CONFIRM
13 A.This
.
PRESS
TO CONFIRM
PRESS
TO CONFIRM