Rösle BBQ Station Videro Pro G3-S Mode D'emploi page 70

Removing­the­burners
Make sure that the gas grill has cooled down, all control knobs are set to "•" OFF and the gas cylin-
der is also turned off. Make sure that all stainless steel main burners are correctly positioned above
the respective nozzle of the gas valve.
1. Turn off the gas supply at the cylinder.
2. Lift up the grates and the burner covers.
3. Loosen the fixing clip at the rear end of the burner (inside).
4. Push the burner back to the right and then in the direction of the valve.
5. Now lift the burner back slightly and pull it from the valve.
6. Clean every burner as described in section „Cleaning the main burners" on page 69.
Stainless steel main burner
Ensure that the burner jet is at the nozzle.
Refitting is the reverse of the removal procedure.
Cleaning­and­care­of­drawer­systems­
• Use a mild detergent and a soft, clean cloth for cleaning the drawers. Allow the drawers to dry comple-
tely after cleaning.
• Lubricate the drawer rails and the support rails once a year. Use a silicone oil or silicone grease.
Disassemble and remove drawers
The drawers can be removed for cleaning and maintenance purposes.
• Remove the contents from the drawer.
• Pull the drawer out as far as the stop.
• Push the right drawer release lever down and the left drawer release lever up in order to unlock the
drawer.
• Pull the drawer out from the support rail.
When you reinsert the drawer, pull the support rail of the carriage out completely and align it with the
drawer rails. Then slide the drawer as far as the stop.
70
Gas valve
Fixing clip