Rösle BBQ Station Videro Pro G3-S Mode D'emploi page 51

Before­starting­the­gas­grill
Checking­the­main­burners
1. Open the lid of the grill.
2. Lift up all the grates.
3. Remove all burner covers.
4. Make sure that all stainless steel main burners are
correctly positioned above the nozzle of the gas
valve.
5. If the burner is no longer above the nozzle due to
transportation, for example, you must remove the
burner and insert it correctly (see section „Remo-
ving the burners" on page 70).
Refitting is the reverse of the removal procedure.
Cleaning­the­fat­collecting­system
1. Before every start-up, remove fat accumulations at all
outlets leading to the fat collector, on the detachable fat
discharge plate and in the fat catcher tray.
2. Also remove adhesions and deposits in the firebox, on lids
of burners, grates and grill plates.
3. After cleaning reinsert the fat discharge plate as far as the
stop.
Checking­the­electronic­igniter­
1. Ensure that the battery is in good condition and inserted with the
correct polarity.
2. Some batteries come wrapped in packaging. You must remove the
packaging. Do not mix up the packaging and the battery label.
Burner
at nozzle
51