Publicité
Les langues disponibles
Les langues disponibles
|
DUET
EDITING
Preparations
e Connect two recorders as described
in "TAPE-TO-TAPE EDITING" on page
Source Player (Recorder A)
42.
Fi je@eoee0e0 000
Notes:
REMOTE
CONTROL
OPERATION
Remote Control
Recorder A (Source player)
Recorder B (recorder)
Load a recorded tape.
Load a blank tape.
1. Press MODE. "EDIT [A] —
[BI"
appears on LCD.
3. Search for an edit-in point on the
Funetions as commanded. (in this state, | Remains in RECORD-PAUSE mode.
source tape.
only recorder A responds to the remote
Press PAUSE/STILL.
control's commands.)
6. Repeat steps 3, 4 and 5 to continue
editing.
Notes:
isappears.
@ When the START button is pressed, the recorder takes a few seconds before actual editing starts due to the automatic
backspace editing system. At the same time the START button is pressed, the player starts playback from the specified edit-in
point. Therefore, it is recommended that you specify a point slightly before the intended edit-in point in step 3 for more accurate
editing. This also ensures that the picture of the resulting edit will be more stable.
—~45~—
Publicité
