Publicité
Les langues disponibles
Les langues disponibles
Using a 2nd video deck as the
source player
e Connect the player's VIDEO OUT (or
S-VIDEO OUT) and AUDIO OUT to the
recorder's VIDEO IN (or S-VIDEO IN)
and AUDIO IN.
Engage the recorder in the AUX mode
("AU" in the channel display) and set
the AUX (S/AV) button depending on
the
connection.
(Press
the
AUX
(S/AV) button so that "S" lights on the
display
panel
for
recording
via
S-VIDEO connection.)
Using a 2nd video deck as the
recorder
The HR-S5800U's
REMOTE
PAUSE
terminal is designed to accept a preroll
command when used with a video deck
which is preroll-capable and equipped
with a Pause Control! Output terminal,
such as JVC's HR-S10000U. This com-
bination makes possible synchronized
preroll editing for high-quality editing
results. In addition, with this connec-
tion, connecting to the HR-S10000U's
SWAP
terminal to the HR-S5800U's
SWAP terminal, enables most functions
of the HR-S5800U to be operated from
the HR-S10000U's controls.
Note:
@ If you do not want the On-Screen
mode indications to be recorded on
the dubbed tape, set "ON SCREEN"
on the VCR SET UP menu to "OFF".
HR-S5800U
as player
To LINE IN-1 L
and R connectors
HR-S10000U
as recorder
To S-VIDEO
IN connector
a
Tips for obtaining better results
The quality of the edited tape may vary depending on the
position of the EDIT switch. It is recommended that you
first make some trial recordings.
e With the EDIT switch of the playback
deck set to ON and recording deck to
EDIT
OFF.
e With the EDIT switch of both playback
7
a
OFF
ON
and recording decks set to ON, and
E-E (Electric-Electric) monitoring
e With the EDIT switch of both decks set
The TV MONITOR button serves as an E-E monitor button
to OFF.
when editing. While playing back a tape on the recorder, you
Choose the setting combination that best suits your
can also check the contents of the player's tape by pressing
preference.
_42-
Publicité
