Publicité
Les langues disponibles
Les langues disponibles
1. Connect
the AUDIO
OUT
1 or 2
2. Connect the VIDEO OUT connector
to the AV television's VIDEO IN jack.
If your AV television is equipped with
an S-VIDEO input, use the S VIDEO
OUT connector.
3. Connect the RF OUT terminal to the
ANTENNA
connector
of the
AV
television.
Note:
With this connection, it is recommended
that you set the RF output channel
Aniieniia cable provided) To AG 120 Vw, 60 Hz
select switch @ to the OFF position.
Then
the RF
OUT
terminal
always
delivers antenna signals directly to the
television. To view video recordings, set
the television to the AV mode.
AV television
AUDIO and VIDEO
cables (provided)
™ "S-VIDEO cable (provided)
(Rear)
set the TV channel selector to either channel 3 or 4.
Notes:
RF output channel select switch
RF OUT+AV_
| OFF
RF OUT only
| CH3 or CH4
Signal from RF OUT
TV/VIDEO button
TV's mode
Direct antenna signal always. | No effect
TV or VIDEO
Direct antenna signal in TV
Switching is necessary
mode. RF channel 3 or 4
depending on the
signal in VIDEO mode.
intended operation.
~18-
Publicité
