Publicité
Les langues disponibles
Les langues disponibles
oes
ee
0.00.00
@ Always key in a full number.
REALTIME GO-TO
To locate any point on the tape a specified time away from the
beginning of the tape.
The beginning of the tape
0.00.00
The procedure is the same as for the Realtime Search except
step El. Specifying the direction is not necessary.
Notes:
e Each step in the operation procedure must be followed by
the next within 60 seconds, otherwise the Go-To or Search
mode will be cancelled.
e Use of the other control buttons while in the Go-To or Search
mode cancels that mode.
@ \f the specified time exceeds the tape length, the tape fast
forwards to the end and then rewinds to the beginning and
stops or enters the Play mode.
ZERO SEARCH
The "counter-zero" position can be located at any time simply
by pressing the ZERO RETURN button.
I Press the C. RESET button at a point which you wish to
locate later. The counter will show "OH 00m 00s".
After recording or playing back the tape, press the ZERO
RETURN button in the Stop mode. The tape will fast forward
or rewind to the counter reading of "OH 00m 00s" (where the
C. RESET button was pressed) and the Stop mode will be
engaged automatically.
Continued on next page .. .
Publicité
