Télécharger Imprimer la page

JVC HR-S5800U Mode D'emploi page 36

Publicité

Les langues disponibles

Les langues disponibles

|
INSTANT
TIMER
RECORDING
The 24-Hour Timer Recording feature allows unattended automatic starting and stopping of the recording of a single program which
starts within a 24-hour period.
Preparation
. Select the channel you wish to record from.
apon—
Setting the timer
EB Press the START
button to engage the 24-Hour Instant
Timer Set mode. The following appears on the screen with
the current time in the START time position.
ON-SCREEN
DISPLAY
DISPLAY PANEL
START
12
ITR
130 AM
Recording time
® Each pressing delays the START time by 30 minutes.
e@ For a more precise time setting, use the SELECT/SET
buttons.
After reaching the desired START time, press the REC/ITR
button the required number of times to set the desired
length of recording time.
e® For a more precise time setting, use the SELECT/SET
buttons (possible up to 8 hours and 59 minutes).
. Turn on the TV and tune to the video channel (if you wish to set the timer using the TV screen display).
. Insert a cassette with its safety tab in place. The recorder turns on automatically.
. Press the TV/VIDEO button to enter the Video mode with the "VIDEO" indicator lighting on the display panel.
. Select the recording speed, "SP" or "EP", by pressing the SP/EP button.
After confirming the START time and recording length,
press the POWER button.
@ "ITR" lights on the display panel and the 24-Hour Instant
Timer Standby mode will automatically engaged.
@ If the program has not been correctly preset, the "ITR"
indicator will blink for about
10 seconds
when
the
POWER
button is pressed. Recheck the programmed
data.
-Notes:
e@ At each step of the timer setting procedure, if no data is
entered within 60 seconds, the 24-Hour Timer Set mode is
cancelled, and the current time is displayed.
@ To cancel the 24-Hour Timer Set mode, press the CANCEL
button once or twice depending on the setting status.
@ 24-Hour Timer Recording has priority over other timer
program settings; therefore, no other programs, set for timer
recording, will be recorded until 24-Hour Timer Recording has
been executed.
@ Even with the power off, pressing the START button displays
the 24-Hour Timer settings for about 10 seconds. for quick
checks.
OFF-TIMER
e Start recording as described on page 32.
After you start recording, the recorder can be set to stop automatically after a certain period of time. Use this facility for starting a
recording before you go to bed or leave home.
Press the REC/ITR button while recording (or twice if in the
Stop mode.
® The following indication will appear on the display, to
show that the recorder is recording in the Instant Timer
Recording
mode
and power will switch off after 30
minutes.
ON-SCREEN
DISPLAY
DISPLAY PANEL
FE
ED ANT UTUNL LTT DEDEUEU EDO CUSSED
aB 20% 108 6 4202
4 6 6
CRD TTL TEEIATTRICEELUUT
ODE UE ESTEE
mr
iat
2
woe
Tet
ITR
0:30
1
U
Each time the ITR button is pressed, recording time
increases by 30 minutes to a maximum of 4 hours. If the
RECATR button is pressed again, the Normal Recording
mode will be entered.
@ For a more precise time setting, use the SELECT/SET
buttons to set to the exact time required (possible up to 8
hours and 59 minutes).
Notes:
e@ While recording is in progress, the displayed time counts
down; when 0:00 is reached, the Record mode is released
after 10 seconds and the power is switched off.
@ If you want to stop recording after having started recording
in the Instant Timer Record mode, press the STOP button.
@ if instant timer recording is engaged while the unit is.in the
Pause
mode,
the timer will count
down
normally,
but
recording will not begin until the PLAY button is pressed.
@ When the Instant Timer Record-Pause mode continues for
longer than 5 minutes, the mode is released and power is
switched off.
@ If you want to check the elapsed time (Realtime Counter
reading) on the screen while performing
Instant Timer
Recording, press the DISPLAY button to obtain the desired
indication
(the ITR indication disappears). After about 5
seconds, the indicator will return to the ITR mode and the
remaining time indication will reappear automatically.
~35—

Publicité

loading