JVC HR-S5800U Mode D'emploi page 11

REAR PANEL
@ AUDIO OUT 1/2 connectors
50)
@
@
®
@
-10-
Same as ® on the front panel. When connecting an
external source to the rear panel connectors for editing,
use this REMOTE PAUSE terminal.
SWAP terminal
If a second VCR is equipped with a Swap Control function,
connect to it with a mini cable. Then the HR-S5800U can be
controlled from the second VCR, using its Swap Control.
RF output channel select switch
See "VIDEO CHANNEL SETTING" on page 18.
ANTENNA IN terminal
Connect an antenna cable or a cable TV line. If necessary,
use the matching transformer (provided).
RF (TV) OUT terminal
Connect to the all-channel antenna connector (female F) of
your television using the provided antenna cable.
AC OUTLET
Supplies power to external equipment requiring less than
300 W. Functions as a SWITCHED outlet when the AC
ONLINE switch @ is set to ON.
Power cord