ULTIMATE SPEED ULG 17 A1 Traduction Du Mode D'emploi D'origine page 7

z Parts description
For this, see Fig. A and B:
Digital Display button
1
Battery Type button
2
Charge Start button
3
"–" pole connection terminal (black)
4
"+" pole connection terminal (red)
5
Digital display
6
Mains cable
7
Fuse with cover
8
PLEASE NOTE: The use of the term "product" or "device" in the following text refers to the
car battery charger named in these operating instructions.
z Technical Specifications
Input voltage:
Return current*:
Nominal output voltage:
Charge current:
Battery type with:
Housing protection type:
* = Return current means the current that the car battery charger consumes from the battery when no
mains current is connected.
Changes to technical and visual aspects of the product may be made as part of future developments
without notice. Accordingly, no warranty is offered for the physical dimensions, information and speci-
fications in these operating instructions. The operating instructions cannot therefore be used as the basis
for asserting a legal claim.
PLEASE NOTE: The maximum load current essentially depends on the internal resistance of the
connected battery. This internal resistance is determined by the following factors: ages, capacity and
type of connected battery.
z Safety instructions
KEEP OUT OF THE REACH OF CHILDREN!
DANGER!
„
improper use!
Avoid danger to life and danger of injury from
230 V ~ 50 Hz
< 5 mA (no AC input)
6 V/12 V
2 A, 6 A, 17 A ± 10%
12 V/6 V and 8–250 Ah capacity
IP 20
GB/IE/NI/CY/MT
7