OEM PULSAR Mode D'emploi page 48

Single-chamber oven assembling (Fig 2)
• Position the oven (1) on the base unit (2) and fix it
by means of the two screws (3), on the right and the
left side.
Two- and three-chamber oven assembling (Fig 3)
• In case of two-chamber ovens, the second oven (4)
shall be positioned on the first one (1), after that fix
both ovens by using the four-hole plates (5) and the
relevant screws and washers.
• In case of three-chamber ovens, the third oven shall
be positioned on the second one and fixed as men-
tioned in the previous item.
EN - 12
2
3
5
4
PULSAR
Installation and connections
FIG. 2
1
3
FIG. 3
5
1