Télécharger Imprimer la page

Denon AVR-1804 Mode D'emploi page 52

Masquer les pouces Voir aussi pour AVR-1804:

Publicité

Les langues disponibles

Les langues disponibles

• Operating the surround mode and surround parameters from the main unit's panel.
1
2
Turn the SELECT knob to select the surround mode.
SELECT
0
(Main unit)
• When turned clockwise
©
o
o
o
o
o
o
o
_
_
o
o
o
O
O
O
o
Z
1
21,3
IRECT _
STEREO_
DOLBY PRO LOGIC 11[ _
DTS NEO:6 _
5CH!6CH STEREO_
MONO MOVIE •
/
VIRTUALSURROUND_
MATRIX_
VIDEO GAME _
JAZZ CLUB _
ROCKARENA "
• When turned counterclockwise
IR_CT _
STEREO_
DOLBY PRO LOGIC 11[ _
UTS NEO:6 _
5CH!6CH STEREO_
MONO MOVIE_]
J
VIRTUALSURROUND _MATRIX
_VIDEO
GAME _
JAZZ CLUB _
ROCKARENA
•_ TO select the surround mode while adjusting
the surround parameters,
tone defeat or tone control, press the SURROUND
MODE
button then operate the selector.
SURROUND
MODE
%
(Main unit)
Press the SURROUND
PARAMETER button.
Press and hold in the surround parameter button to select the parameter you want to set.
• The parameters
which can be set differ for the different
surround modes. (Refer to "Surround
Modes and Parameters"
on page 53.
SURROUND
PARAMETER
%
(Main unit)
Display the parameter you want to adjust, then turn the SELECT knob to set it.
NOTE:
• When playing PCM digital signals or analog signals in the 5CH/6CH STEREO, ROCK ARENA, JAZZ CLUB, VIDEO GAME, MONO MOVIE or
MATRIX surround
modes and the input signal switches
to a digital signal encoded in Dolby Digital, the Dolby surround
mode switches
automatically.
When the input signal switches
to a DTS signal, the mode automatically
switches to DTS surround.
• When the "5CH/6CH
STEREO" mode is selected, the display differs according to the Surround Back CH ON/OFR
Surround Back CH ON:
6CH STEREO
Surround Back CH OFF:
5CH STEREO
Surround parameters
_3_
ROOM SIZE:
This sets the size of the sound field.
There are five settings: "small",
"med.s"
(medium-small),
"medium",
"med.l"
(medium-large)
and "large".
"small"
recreates a small sound
field, "large"
a large sound field.
EFFECT LEVEL:
This sets the strength of the surround effect.
The level can be set in 15 steps from 1 to 15. Lower the level if the sound seems distorted.
DELAY TIME:
In the matrix mode only, the delay time can be set within the range of 0 to 110 ms.
52

Publicité

loading

Ce manuel est également adapté pour:

Avr-884