Publicité
Les langues disponibles
Les langues disponibles
NOTES:
• When you adjust the channel levels while in the TEST TONE mode, the channel level adjustments
made will affect all surround
modes.
Consider this mode a Master Channel Level adjustment
mode.
• You can adjust the channel levels for each of the following
surround modes:
DIRECT, STEREO, DOLBY/DTS SURROUND, 5/6 CH STEREO,
MONO MOVIE, ROCK ARENA, JAZZ CLUB, VIDEO GAME, MATRIX and VIRTUAL.
• This setting assigns the digital input jacks of the AVR-1804/884 for the different
input sources.
1
Select the digital input jack to be assigned to the input source.
• To select the digital input jack
%,
Z"¢_ _"
:[6 COi:::i::-::
C[::
3
Digital
In
Assignment
>16
COAXIAL
:__)
17
OPTICAL1:
DVD/VDP
18
OPTICAL2:
TV/DBS
19
OPTICAL3:
CDR/TAPE
• To select the input source
Select "OFF" if nothing is connected.
Press the ENTER or <z> (down) button to enter the setting and switch the Component Video input setting.
NOTE:
• PHONO, TUNER and V. AUX cannot be selected.
• This setting assigns the color difference (component)
video input jacks of the AVR-1804/884 for the different
input sources.
1
Select the component
(Y, PB/CB and PR/CR)video input terminal to
be assigned to the input source.
• Component
video terminal selection
20
_..._ :[ [:EO :[
[:L._[:
Video
In
Assignment
>20
VIDEO1
:_ri_i_r_)
21
VIDEO2
: TV/DBS
3
• Input source selection
Select "OFF" if nothing is connected.
Press the ENTER or _
(down) button to enter the setting and switch the Auto Surround Mode setting.
26
Publicité
