Publicité
Les langues disponibles
Les langues disponibles
This screen is not displayed when not using a subwoofer.
• Set the crossover frequency and subwoofer
mode according to the speaker system being used.
1
Select the "Subwoofer
Mode".
Select the setting.
6 Si.o.iHODE NORH
_6 Subwoofer
Mode
_
LFE
+Main
? Crossover
Frequency
Select the "Crossover
Frequency"
mode.
Select the frequency.
"?:
6 Subwoofer
Mode
: LFE
+Ma i n
_>? Crossover
Frequency
(__
Press the ENTER or
setting.
(down)
button to enter the setting and switch
to the SPEAKER DISTANCE
NOTES:
-- Assignment
of low frequency
signal range --
• The signals produced from the subwoofer
channel are LFE signals (during playback of Dolby Digital or DTS signals) and the low frequency
signal range of channels set to "SMALL"
in the setup. The low frequency signal range of channels set to "LARGE" are produced from those
channels.
-- Crossover Frequency --
• When
"Subwoofer"
is set to "Yes" at the "Speaker
Configuration
Setting",
set the frequency
(Hz) below which the bass sound of the
various speakers is to be output from the subwoofer
(the crossover frequency).
• For speakers set to "Small",
sound with a frequency
below the crossover
frequency
is cut, and the cut bass sound is output from the
subwoofer
instead.
NOTE: For ordinary speaker systems,
we recommend
setting the crossover
frequency
to 80 Hz. When
using small speakers, however,
setting the crossover frequency to a high frequency may improve frequency response for frequencies
near the crossover frequency.
-- Subwoofer
mode --
• The subwoofer
mode setting is only valid when "Large"
is set for the front speakers and "YES" is set for the subwoofer
in the "Speaker
Configuration"
settings (see page 22).
• When the "LFE+MAIN"
playback mode is selected, the low frequency signal range of channels set to "Large"
are produced simultaneously
from those channels and the subwoofer
channel.
In this playback mode, the low frequency range expand more uniformly through the room, but depending on the size and shape of the room,
interference
may result in a decrease of the actual volume of the low frequency range.
• Selection of the "LFE " play mode will play the low frequency
signal range of the channel selected with "Large"
from that channel only.
Therefore,
the low frequency signal range that are played from the subwoofer
channel are only the low frequency signal range of LFE (only
during Dolby Digital or DTS signal playback) and the channel specified as "Small"
in the setup menu.
• Select the play mode that provides bass reproduction
with quantity.
• When the subwoofer
is set to "Yes", bass sound is output from the subwoofer
regardless of the subwoofer
mode setting
in surround
modes other than DoIby/DTS.
• In surround modes other than Dolby Digital and DTS, if the subwoofer
is set to "YES", the low frequency
portion is always output to the
subwoofer
channel. For details, refer to "Surround
Modes and Parameters"
on page 53.
23
Publicité
