Publicité
Les langues disponibles
Les langues disponibles
For the three kinds of input signals as shown below, the surround mode played the last is stored in the memory. At next time it the same signal
inputs, the memorized
surround mode is automatically
selected and the signal is played.
Note that the surround
mode setting is also stored separately for the different
input function.
SIGNAL
Default Auto Surround Mode
0_
Analog and PCM 2-channel signals
STEREO
2-channel signals of Dolby Digital, DTS or other multichannel
format
Dolby PL]] Cinema
_3._
Multichannel
signals of Dolby Digital, DTS or other multichannel
format
Dolby or DTS Surround
Select "ON"
if you want to use the auto surround mode, "OFF" if
you do not want to use it.
22
i:::iUTOSURR,,
ON
>22
Auto
Surround
Mode
) OFF
2
Press the ENTER or _
(down) button to switch the Ext. In SW Level setting.
Set the playback level of the analog input signal connected
to the Ext. In terminal.
2
Select desired setting.
• Select according to the specifications
of the player being used.
Also refer to the player's operating instructions.
• +15dB (default) recommended.
(0, +5, 10 and +15 can be
selected.)
:23 E >:;T..:;[ N Si.-.i + :[ 5 1
_23
Ext. In SW Level
Subwoofer
Level
Press the ENTER or
(down) button to switch the Power Amp Assignment
setting.
27
Publicité
