Publicité
Les langues disponibles
Les langues disponibles
• To connect the video signal, connect using a 75 _-Z/ohms video signal cable cord. Using an improper cable can result in a drop in video quality.
• When making connections,
also refer to the operating instructions
of the other components.
• The AVR-1804/884
is equipped with a function for up-converting
video signals.
• The signal connected
to the video signal terminal is output to the S-Video monitor out terminals.
• The REC OUT terminals have no conversion function, so when recording only connect the video terminals.
TV or DBS tuner
[_o
0
®0
I Connecting
a TV/DBS
tuner I
TV/DBS
• Connect the TV's or DBS tuner's video output jack (VIDEO OUTPUT) to the
(yellow) TV/DBS IN jack using a 75 £_/ohms video coaxial pin plug
cord.
• Connect the TV's or DBS tuner's audio output
jacks (AUDIO OUTPUT) to
the _
TV!DBS IN jacks using pin plug cords.
@
o
@
@
@
@
@
@
DVD player or video disc player (VDP), etc.
] V
[Connecting
a DVD player or a video disc player (VDP) ]
DVD
• Connect the video disc player's video output jack (VIDEO OUTPUT) to the _
(yellow)
DVD/VDP IN jack using a 75 _/ohms
video coaxial pin plug cord.
• Connect the video disc player's analog audio output jacks (ANALOG AUDIO OUTPUT) to the
DVD/VDP IN jacks using pin plug cords.
• It is also possible to connect a video disc player, DVD player, video game, etc., to the VCR-2
ROUT[.
R EN L
OUT
IN
I-- AUDIO
--I
VIDEO
[ Connecting
a video decks I
jacks.
@
@
@
Monitor
TV
[ ]
|
|
I Connecting
a Monitor
TV 1
MONITOR
OUT
• Connect the TV's video input jack (VIDEO INPUT) to the
MONITOR
OUT jack using a 75 _!ohms
video
coaxial pin plug cord.
Note on connecting
the digital input jacks
• Only audio signals are input to the digital input jacks.
For details, see pages 10, 26.
• There are two sets of video deck (VCR) jacks, so two video decks can be connected
for simultaneous
recording or video copying.
Video input/output
connections:
• Connect the video deck's video output jack (VIDEO OUT) to the _
(yetlow) VCR-I IN jack, and the video deck's video input jack (VIDEO IN) to the
(yellow) VCR-1 OUT jack using 75 _/ohms
video coaxial pin plug cords.
Connecting
the audio output
jacks
• Connect the video deck's audio output
jacks (AUDIO OUT) to the _
VCR-1 IN jacks, and the video deck's audio input jacks (AUDIO IN) to the _
VCR-1
OUT jacks using pin plug cords.
•_ Connect the second video deck to the VCR-2 jacks in the same way.
11
Publicité
