Publicité
Les langues disponibles
Les langues disponibles
I
11
2
@;_;;£',,
.....
5
!-6- . ......io
0
@ B & o
o o o _
,-5i9::o
/
3
Select the input source to be played.
Example: CD
FUNGIION
CO
%
(Main unit}
(Remote
control unit)
•_ To select
the
input
source
when
MAIN
ZONE2/REC OUT is selected, press
(_
the MAIN
button
then operate the
input function
selector.
(Main unit)
Select the input mode.
• Selecting the analog mode
Press the ANALOG button to switch to the analog input.
ANALOG
(Main unit)
(Remote
control unit)
• Selecting the external input (EXT. IN) mode
Press the EXT. IN to switch the external input.
EXT. IN
%
%
(Main unit)
(Remote
control unit)
• Selecting the AUTO, PCM and DTS modes
The mode switches as shown below each time the INPUT
MODE button is pressed.
AUTO _
PCM
---_
DTS
t
I
INPUT MODE
(Main unit)
(Remote
control unit)
_
®
0
0
0
0
_
n
ul
OlD OlD OlD CD
-5
Input mode selection function
Different input modes can be selected for the different input sources.
The selected input modes for the separate input sources are stored in
the memory.
@_AUTO (auto mode)
In this mode, the types of signals being input to the digital and
analog input jacks for the selected input source are detected and
the program in the AVR-1804/884's
surround decoder is selected
automatically
upon playback. This mode can be selected
for all
input sources other than PHONO and TUNER.
The presence or absence of digital signals is detected,
the signals
input to the digital
input jacks are identified
and decoding
and
playback are performed automatically
in DTS, Dolby Digital or PCM
(2 channel stereo) format.
If no digital signal is being input, the
analog input jacks are selected.
Use this mode to play Dolby Digital signals.
PCM (exclusive PCM signal playback mode)
Decoding and playback are only performed
when PCM signals are
being input.
Note that noise may be generated
when using this mode to play
signals other than PCM signals.
@_DTS (exclusive DTS signal playback mode)
Decoding and playback are only performed when DTS signals are
being input.
_4_ANALOG (exclusive analog audio signal playback mode)
The signals input to the analog input jacks are decoded and played.
EXT. IN (external decoder input jack selection mode)
The signals being input to the external decoder
input jacks are
played without passing through the surround circuitry.
NOTE:
• Note that noise will be output when CDs or LDs recorded in DTS
format are played in the "PCM"
(exclusive PCM signal playback) or
"ANALOG"
(exclusive
PCM signal
playback) mode.
Select
the
AUTO or DTS mode when playing signals recorded in DTS.
Notes on playing a source encoded with DTS
* Noise may be generated
at the beginning
of playback and
while searching during DTS playback in the AUTO mode.
If
so, play in the DTS mode.
* In some rare cases the noise may be generated
when you
preform the operation to stop playback of a DTS-CD or DTS-LD.
36
Publicité
