Publicité
Les langues disponibles
Les langues disponibles
['_
SETTING
UP THE SYSTEM
• Once all connections
with other AV components
have been completed
as described
in "CONNECTIONS"
(see pages 10 to 18), make the
various settings described
below on the display.
These settings are required to set up the listening room's AV system centered around the this unit.
• Use the following
buttons to set up the system:
1
Set the slide switch to "AUDIO".
AUDIO•
• VIDE0--
2
Use the following
buttons to set up the system:
/
p
DISPLAY
F_'c_M
"ITcST TONE
VIDE0 SELEC'F
DIMMER
INPUT
I SYSTEM
SETUP button
Press this to display the system setup on the display.
I CURSOR buttons (A, T, _1, I_)
Press this change what appears on the display.
I ENTER button
Press this to switch the display.
Also use this button to complete
the setting.
I
I
• System setup items and default values (set upon shipment from the factory)
System
setup
Speaker
Configuration
Subwoofermode
Crossover
Frequency
Delay_me
Test Tone
Digital In
Assignment
Video In
Assignment
Auto Surround
Mode
Ext. In SW Level
Power AMP
Assignment
On Screen
Display
Auto Tuner
Presets
Input
the
combination
of
speakers
in your
system
and
their
corresponding
sizes (SMALL
for regular speakers,
LARGE for fuIF
size, full-range)
to automatically
set the composition
of the signals
output from the speakers
and the frequency
response.
This selects
the subwoofer
speaker for playing deep bass signals.
Set the frequency
(Hz) below which the bass sound of the various
speakers
is to be output from the subwoofer.
This parameter
is for optimizing
the timing
with which the audio
signals
are produced
from the speakers
and subwoofer
according
to the listening
position.
This adjusts the volume
of the signals
output from
the speakers
and
subwoofer
for the
different
channels
in order
to
obtain
optimum
effects.
This assigns the digital input jacks for the different
ieput sources.
This assigns the component
video input jacks for
the different
video input sources.
Input source
Digital
Inputs
Input source
Component
Inputs
Auto surround
mode function
setting.
Set the Ext. In Subwoofer
channel playback
level.
Set this to switch
the surround
back channel's
power amplifier
for
use for Zone 2.
This sets
whether
or not to display
the on-screen
display
that
appears
on the monitor
screen when the controls
on the remote
control unit or main unit are operated.
FM stations
are received automatically
and stored in the memory.
Front Sp.
Large
Front L
12 ft
Front L
0dB
CD
COAXIAL
DVD/VDP
VIDEO 1
A1 -_ A8
B1 -_ B8
C1 -_ C8
D1 -_ D8
E1 -_ E8
Front R
12 ft
Front R
0 dB
Center Sp.
Small
DVD/VDP
OPTICAL
1
TV/DBS
VIDEO 2
Default settings
Surround
Sp.
Small
LFE (Normal)
80 Hz
Center
Surround
L
Surround
12 ft
10 ft
10 ft
Center
Surround
L
Surround
0 dB
0 dB
0 dB
TV/DBS
VCR-1
OPTICAL 2
OFF
VCR-1
VCB-2
OFF
OFF
Auto
Surround
Mode
= ON
Ext.
In SW Level
= +15
dB
Surround
Back
ON
87.5/89.1/98.1/107.9/90.1/90.1/90.1/90.1
MHz
520/600/1000/1400/1500/1710
kHz, 90.1/90.1
MHz
90.1 MHz
90.1 MHz
90.1 MHz
Surround
Back Sp.
Small
R
Surround
Back
10 ft
R
Surround
Back
0dB
VCB-2
OFF
M AUX
OFF
Subwoofer
Yes
Subwoofer
12 ft
Subwoofer
0dB
CDR/TAPE
OPTICAL 3
20
Publicité
