Publicité
Les langues disponibles
Les langues disponibles
• Use this setting to adjust to that the playback level between
the different channel is equal.
• From the listening position, listen to the test tones produced from the speakers to adjust the level.
• The level can also be adjusted directly from the remote control unit. (For details, see page 43.)
1
_
Select "Yes".
[i. 5
T=
Ti:::ii--iiiii:
-:[[YES
Test
Tone
>15
Test
Tone
: Yes_
_
Set the mode.
Select "Auto"
or "Manual".
T ..: T ONE
3
4
• Auto:
Adjust the level while listening to the test tones produced
automatically
from the different
speakers.
• Manual:
Select the speaker from which you want to produce the test tone
to adjust the level.
>Test
Tone
r_1_Manual
Front
L
0dB
Center
0dB
Front
R
0dB
Surr.
R
0dB
Back
0dB
Surr.
L
0dB
Subwoofer
0dB
Press the <:z> (down) button to start Test Tone.
If the "Auto"
mode is selected:
Test tones are automatically
emitted from the different speakers.
The test tones are emitted from the different
speakers in the following
order, at 4-second intervals the
first time and second time around, 2-second intervals the third time around and on:
5
6
Use the CURSOR left and right buttons to adjust all the speakers to the same volume.
The volume can be adjusted between
-12 dB and +12 dB in units of 1 dB.
b. When the "Manual"
mode is selected
Use the CURSOR up and down to select the speaker for which
you want to output test tones, then use the CURSOR left and
right to adjust so that the volume
of the test tones from the
various speakers is the same.
Test
Tone
Auto:[_111_lltl_ll
>Front
L
EEk31t_l_l)
Center
OdB
Front
R
OdB
Surr.
R
OdB
Back
OdB
Surr.
L
OdB
Subwoofer
OdB
Example: When the volume is set to
-12 dB while the Front Lch
speaker is selected
(Remote
control unk)
After completing
the adjustment,
press the ENTER button.
Press the ENTER or <-2:> (down) button to enter the setting and switch the DIGITAL input setting.
25
Publicité
