Denon AVR-1804 Mode D'emploi page 24

• Input the distance between the listening position and the different speakers to set the delay time for the surround mode.
Preparations:
Measure the distances between the listening position and the speakers (L1 to L5) on the diagram at the
right).
L1 : Distance between center speaker and listening position
L2: Distance between front speakers and listening position
L3: Distance between surround speakers and listening position
L4: Distance between surround back speaker and listening position
L5: Distance between subwoofer and listening position
CAUTION:
•_ Please note that the difference for every speaker should be 15 ft or less.
NOTES:
• No setting when "None" has been selected for the Speaker Configuration setting.
• Surround back is not displayed when ZONE 2 is set with the POWER AMP ASSIGN setting.
FL Center FR
_o_woo_er-_ _,_?
os,t on
_-sB
1
__, Select the speaker to be set.
_'_. :8 FR0 HT i . ... :L 2 -i:i::
Delay Time
> 8 Front L _b3v, Ir_l)
9 Front R 12ft
10 Center 12ft
11Surr. L 10ft
12 Surr, R 10ft
13 & Back 10ft
14 Subwoofer 12ft
Set the distance between the speaker and listening position.
The distance changes in units of 1 foot (0.1 meters) each time the button is pressed. Select the value closest
to the measured distance.
3
Press the ENTER or <:z:> (down) button to enter the setting and switch the Test Tone setting.
24