Cleaning And Hygiene; Important - Medela Mini Electric Mode D'emploi

Cleaning and Hygiene

VIlI
Follow these cleaning instructions unless you are told otherwise by your healthcare
professional.

Important

Prior to first
use and
once daily
After each
use
Hints
All manuals and user guides at all-guides.com
• Use drinking water quality for any of the following described
cleaning procedures.
• Clean parts immediately after use to avoid dry up of milk residues
and to prevent from growth of bacteria.
• Disassemble all parts prior to cleaning. Especially be sure to
remove the yellow valve head from the breastshield and separate
the white valve membrane from the valve head.
• Disassemble, wash and rinse all parts of your pump kit that
come in contact with the breast and milk (a+b+c+d+f+g+h),
except motor unit.
• Place parts in a saucepan of sufficient capacity.
• Fill with cold water until the parts are well covered. Optionally,
a tea spoon of citric acid may be added to avoid a build-up of
limescale.
• Heat it up and allow to boil for 5 minutes.
• Remove from stove and drain water off.
• Dry parts with a clean towel.
Alternatively, the disassembled parts can be sanitized in top rack
of dishwasher or steam-sterilized.
Note: Food colorings may discolor components which will not
affect performance.
• Disassemble and handwash all parts of your pump kit that come in
contact with the breast and milk (a+b+c+d+f+g+h) in warm, soapy
water (except motor unit).
• Rinse in clear water.
• Dry parts with a clean towel.
• Use a damp (not wet) cloth to wipe the motor unit after each use.
After cleaning, when parts are not in use, put in a clean zip lock
bag or store in a container with lid. Alternatively, the parts can be
wrapped in a clean paper or cloth towel.
EN 7