Publicité
Les langues disponibles
Les langues disponibles
EN MT LB
No.
3
4
5
9 Configuration
NOTICE! Damage hazard
Use a small screwdriver to carefully move the DIP switches to the required position.
Setting up the alternator type
This function can only be activated by the DIP switch, not by an external controller (optional TD283 display or mobile
app).
Slide the DIP switch according to your vehicle alternator type.
Table 11: Alternator configuration
DIP switch po-
sition (gray)
Setting the charging program
NOTICE! Damage hazard
Only use batteries that are suitable for the specified charging voltage.
Select the charging program suitable or the type of house battery used based on the battery manufacturer's specifi-
cations, the information on the charging curves (see
data
). The specified charging times apply to an average ambient temperature of 20 °C.
20
Description
Fridge
Control unit
80 A fuse (max. supported current 80 A, recommended current 60 A)
House battery
Starting battery
Standard alternator
Smart alternator
Battery charging
Function
activated
deactivated
activated
deactivated
function) and the technical data (see
12 V
24 V
13.3 V
26.6 V
12.7 V
25.4 V
11.7 V
23.4 V
10.8 V
21.6 V
Technical
Publicité
