Menzer TBS 225 AV Traduction Du Mode D'emploi Original page 34

7. Error handling and troubleshooting
Problem Possible causes
• The machine is without • Mains plug is incorrectly inserted
function or malfunctioning. into the mains socket.
• Mains plug is defective.
• Worn carbon brushes.
• Mains fuse was tripped.
• The machine is too noisy. • Velcro backing pad or abrasive
incorrectly attached.
• Machine vibration is
excessive. • Filler material or substrate to be
processed is too hard.
• The machine produces too • Clogged extraction pipe.
much dust.
• Dust bag in the industrial extractor
• Insufficient extraction is full.
performance.
• Kink in the extractor hose.
• Defective (click-in) brush ring.
• Positions of the extraction openings
are not congruent.
• Too much of the substrate is • The grit size of the abrasive is too
abraded. large.
• The entire sanding area • The abrasive grit is incorrect or too
displays a bad or sub-optimal large and/or the incorrect type of
surface quality. abrasive is being used.
• The material or substrate to be
processed is not yet completely dry.
• The substrate is too soft and/or has
a very high filler content.
• Striae in the sanded area. • Backing pad not flat on the
substrate.
• Filler material too soft.
• Deteriorating adhesion of the • Reverse of the abrasive is worn.
abrasive or the velcro backing
pad accessory. • Hook & loop of the velcro layer on
the backing pad is worn.
12 GB
Remediation
• Check the plug connection; insert
the mains plug correctly into the
mains socket.
• Check mains fuse.
• Contact the MENZER repair service.
• Attach the velcro backing pad and
abrasive securely and centrically.
• Change the rotational speed.
• Choose another abrasive. Read our
abrasive overviews or seek advice.
• Contact the MENZER repair service.
• Clean the extraction system.
• Empty the dust bag.
• Unkink the extractor hose.
• Replace the (click-in) brush ring.
• Position the extraction openings
congruently.
• Choose a smaller grit size.
• Choose a smaller grit size and/or a
different type of abrasive. Read our
abrasive overviews or seek advice.
• Read the data sheets and
processing information provided by
the substrate manufacturer.
• Position the velcro backing pad
flush on the substrate.
• Choose a smaller grit size.
• Replace the abrasive.
• Replace the velcro backing pad.
• Use the backing pad cover.
8. Transport and storage
The machine must only be transported in the
original MENZER packaging provided. Always store
the sander in its appropriate packaging outside
the reach of children and prevent exposure to
moisture.
9. Disposal
Do not dispose of electric power tools in
household waste! The devices, their accessories
and packaging must be ecologically recycled in
compliance with national requirements!
EU only: In accordance with the EU
Directive 2012/19/EU on electrical and
electronic waste, electric power tools must be
collected separately and ecologically recycled.
10. Functional accessories and
peripherals
Only use original MENZER accessories matching
this particular device for optimal work results.
X. MENZER TBS 225 accessories and spare parts (see
page *23*) – not included in the scope of delivery:
https://www.menzer-tools.com/
service/tbs-225-lp
Y. MENZER TSW 225 accessories and spare parts (see
page *23*) – not included in the scope of delivery:
https://www.menzer-tools.com/
service/tsw-225-lp
Z. MENZER industrial vacuum cleaner (see page
*23*) – not included in the scope of delivery:
https://www.menzer-tools.com/
service/vcx-3x0-lp
11. EC declaration of conformity
0125-B01-01-000001-A
We hereby declare under our sole responsibility
that the machine designated below, placed on the
market by us and described in these operating
instructions, complies with the following stand-
ards. This declaration loses its validity in case of a
machine modification without our consent.
Product: Drywall sander
MENZER TBS 225
Type:
Serial number range: 308/310/312/314 xxx xxx
Type: MENZER TBS 225 AV
Serial number range: 309/311/313/315 xxx xxx
MENZER TSW 225
Type:
Serial number range: 316/318/320/322 xxx xxx
Type: MENZER TSW 225 AV
Serial number range: 317/319/321/323 xxx xxx
Relevant EC directives
2006/42/EC; (EC) No. 1907/2006 (REACH);
2011/65/EU; 2014/30/EU
Applied harmonised standards
EN 60745-1; EN 60745-2-3; EN 55014-1;
EN 55014-2; EN 61000-3-2; EN 61000-3-3
MENZER GmbH Torsten Ceranski
Celsiusstraße 20 Managing Director
04420 Markranstädt Markranstädt,
Germany 19/05/2021
GB 13