Rösle Videro G2-P Mode D'emploi page 39

Before­starting­the­gas­grill
Checking­the­main­burners
1. Open the lid of the grill.
2. Lift up all the grates.
3. Remove all burner covers.
4. Make sure that all stainless steel main burners are correctly positioned above the nozzle of the gas
valve.
5. If the burner is no longer above the nozzle due to transportation, for example, you must remove the
burner (see section "Removing the burners").
Refitting is the reverse of the removal procedure.
Cleaning­the­fat­collecting­system
1. Before every use, remove fat deposits in the removable fat catcher tray and at all outlets leading to it.
2. Also remove adhesions and deposits in the firebox, on lids of burners, grates and grill plates.
3. After cleaning reinsert the fat catcher tray as far as the stop and lock into the hooks on the front left
and right.
Leak­check
The gas connections of the gas grill were checked for leaks at the factory. However, for safety reasons you
should check all connections again for leaks before you start up your gas grill. Individual gas connections
may have come loose during transportation, or incurred damage.
For your own safety check the gas connections every time before you start the grill!
1. Check whether all control knobs on the grill are at "•" OFF.
2. Connect the gas pressure regulator according to the section "Fitting the gas pressure regulator".
1
2
1
2
39