Publicité
Les langues disponibles
Les langues disponibles
Procedure to follow at the end of the working day on all groups.
NOTE: the following operations must be carried out when the machine is on and pressurized.
1
Remove the filter holder
from the coffee group.
5
dispenser unit.
Do not remove the
coffee dispensing.
FILTER-HOLDERS -
1
In a suitable container that is
neither aluminium or iron, pour
a litre of hot water (50÷80°C)
and a quantity of detergent
according to the product
instructions.
4
Remove any residue with a sponge and rinse well with
running cold water.
2
Using a brush, clean the
cover gasket.
6
Press the START/STOP
button and press it again
after 10 seconds. Repeat
this step 10 times.
2
3
Insert the rubber disk into
7
and execute the rinse cycle with water for about 30".
5
A
the anchoring spring (A
15 EN
4
Pour in a packet or dosing
cupful of detergent powder.
3
holders in this solution for
about 15 minutes.
NOTE! Only immerse the
metal parts.
Publicité
