Publicité
Les langues disponibles
Les langues disponibles
USE
10. Daily operation
"Before setting the machine to work, make sure that:
• the main electric power switch is on;
• the mains water tap has been turned on".
CAREFULLY PAY ATTENTION TO THE
SEQUENCE FOR ACTIVATING THE SWITCHES
(1) AND (1A).
1
1
Press the luminous main switch (1) into position ON
; the related indicator light switches on and the key also
light up.
If the water level in the boiler is lower than the minimum
restored pressure in the manometer-pump.
During heating, if one of the coffee dispensing push buttons is pressed, the machine dispenses a coffee at the temperature
reached at the time.
Heating is completed when the boiler gauge indicator (14) remains stable in the P green area.
The machine is now ready to dispense coffee, steam and hot water.
push button (18 DT / A; 9 C / S) and let the machine dispense coffee for a few seconds. Then press again the push button
(18 DT / A; 9 C / S) to stop dispensing.
DT / A
OFF
ON
(10) are at similar temperatures, press the coffee dispensing
18
10 EN
10
1
2
1A
ONLY AFTER
completed should you press the light switch that
activates the resistance (1A) into position ON
related indicate light switches on and the heating phase
begins.
Wait until the operating pressure (approx. 1.2 bar) appears
on the manometer (14).
At this point, the machine is ready for use.
C / S
P
14
1A
; the
2
Publicité
