Data (Data) - Uploading And Downloading The Device Settings - Burkert 8022 Mode D'emploi

Type 8022
SettingandFunctions
9.4.4. dAtA (Data) – uploading and downloading the device
This function is not available on a "Version 1" of the device. Refer to the nameplate.
The parameter makes it possible to transfer the device settings from one device to another by means of the display
and configuration unit.
Access the parameter:
Figure 14: Data – Transfer of data from/to display and configuration unit
upload (uPLd):
When uploading, the device settings are transferred to the display and configuration unit.
After the data has been transferred, "ready" (rdy) is displayed.
If the data could not be transferred to the display and configuration unit, the error message "Err" is displayed.
Download (dnLd):
When downloading, the device settings previously uploaded in the display and configuration unit are transferred
to another 8022 device.
After the data has been transferred, "ready" (rdy) is indicated on the display.
If the data could not be transferred to the 8022 device, the error message "Err" is displayed.
settings
transfer from the device
to the display and con-
figuration unit
transfer from the
display and configu-
ration unit to the device
Cancel
rdy = d ata has been
Confirm
Err = d ata transfer not
English
transferred
or
possible
23