Connection Of The Pulse Divider; Commissioning - Burkert 8022 Mode D'emploi

Type 8022
Assembly,Installation
7.2.2.

connection of the pulse divider

The pulse divider type 8022 has 1 NPN pulse output and 1 PNP pulse output. Connect the pulse divider with 3
wires.
connection of the npn output
connection of the pnp output
Figure 6: Connection of the NPN output or the PNP output of the pulse divider
8.

cOmmissiOning

noTE
• Only power on the device when the cover is closed.
• Switch off the device before removing the display and configuration unit.
8022
12 - 30 V Dc
npn
gnD
8022
12 - 30 V Dc
pnp
gnD
e.g. plc
V+
in
gnD
e.g. plc
V+
in
gnD
English
13