Cleaning The Turbo Nozzle - Cleanmaxx PC-P008E Mode D'emploi

EN
Cleaning the Motor Unit, Extension Tube and Nozzles
• Wipe down the motor unit (15), extension tube (8) and nozzles with a damp, soft
cloth if necessary. Then dry them with a soft cloth.
• Regularly remove hair and fl uff from the nozzles and brushes.
• Remove the dust cloth from the dusting mop (9) and wash it as per the washing
instructions.
Washable at 40°C
Tumble dry, low heat.
●
Do not dry-clean.

Cleaning the Turbo Nozzle

To make it easier to clean, the brush can be removed from the turbo nozzle (1):
Storage
• Store the device in a cool, dry place which is protected from direct sunlight and is out
of the reach of children and animals.
• For easy storage, attach the device with its suction opening (20) facing downwards
on the wall bracket which is supplied.
AZSXXL_DE-EN-FR-NL_A5_V3.indb 24 AZSXXL_DE-EN-FR-NL_A5_V3.indb 24
24
•
Do not use fabric softener.
Wash separately or with the same
colours.
1. Slide the latch fastener on the bottom of the turbo nozzle
towards the small wheel on the turbo nozzle.
2. Open and remove the latch.
3. Take out the brush and remove any contamination.
4. Reinsert the brush. When you do this, fi rst insert the end
with the star-shaped recess.
5. Insert the latch and slide the latch fastener back in place.
Do not bleach.
Iron at low temperature
13.03.2018 08:10:38 13.03.2018 08:10:38