Cleaning The Housing; Cleaning The Turbo Nozzle; Troubleshooting; Technical Data - Cleanmaxx XL-306E-220 Mode D'emploi

cleaning the housing

• Clean the housing, when necessary, using a slightly damp soft cloth.
• Remove hair and fluff from the nozzles at regular intervals.

cleaning the turbo nozzle

troubleshooting

Should the device not work at some time, exhibits signs or damage or a spare part is required,
please contact the customer service department. For your own safety, do not attempt to carry
out repairs yourself.
The following table contains tips as to how you can remedy small problems yourself:
Problem
The device generates no
suction.
Low suction force.
Dust escapes from the
device during cleaning.
Unusual odour

technical data

Article number:
Model number:
Voltage:
Power consumption:
Protection class:
08186_DE-GB-FR-NL_V1.indb 27
All manuals and user guides at all-guides.com
1. Push the release knob, as shown, in the direction of the arrow and
open up the cover at the same time.
2. Pull out any hair or dirt trapped in the bristles of the nozzle.
3. Push the release knob again in the direction of the arrow and close
the cover at the same time.
causes, solutions, tips
Ensure that the plug is correctly inserted into the plug
socket.
• Is the exhaust air valve in the handle open? Close it.
• Has the MAX mark in the dust container been
exceeded? Empty the dust container.
• Is one of the filters heavily soiled? Clean it.
• Is the nozzle, the telescopic tube or the suction hose
clogged? Pull out the mains plug and clear the clogging.
Check whether the dust container is correctly inserted and
closed; correct, if necessary.
A new odour is normal when the device is used for the
first time; it disappears after a while.
Z 08186
XL-306E-220
220–240 V~ 50 / 60Hz
max. 2200 W
II
27
07.12.12 09:09