Cleaning The Housing; Fl Oor And Brush Nozzle; Cleaning The Turbo Nozzle; Storage - Cleanmaxx XL-777C-80 Mode D'emploi

Cleaning the housing

If needed, clean the housing with a damp, soft cloth.
Cleaning the universal fl oor nozzle, hard fl oor nozzle, cushion nozzle and
fl oor and brush nozzle
Regularly remove hair and lint from the nozzles.

Cleaning the turbo nozzle

Regularly remove hair and lint from the nozzles.
D

Storage

Store the vacuum cleaner in a dry, cool indoor room that is not accessible to children
and animals.
Tips for practical storage:
• Push the telescoping tube as far as possible together and then mount the fl oor nozzle
on the telescoping tube if this has not already occurred. You can now hook the fl oor
nozzle onto the back of the device.
• Secure the accessory bracket on the telescoping tube, then clip the cushion nozzle
and the tile and brush nozzle into the bracket.

Subsequent ordering

Visit our website to order additional original spare parts/accessories:
www.service-shopping.de

Remedying errors/disturbances

In the event your unit no longer functions, exhibits damages or requires a spare part,
please contact our customer service centre. For your own safety, do not perform any
repairs yourself. The following table gives you tips on how to resolve minor problems
yourself:
Problem
The vacuum cleaner
has no suction power.
1. Turn the ring (D) on the end piece of the nozzle counter-
clockwise to open the nozzle.
2. Then carefully remove the upper part of the housing. You can
now remove hair, dust etc.
3. Once you have cleaned it, reassemble the turbo nozzle back
and turn the ring on the end piece clockwise into the closed
position.
Possible cause/solution
Ensure that the plug has been properly inserted in the socket.
26