Nice RD300 Manuel D'installation page 5

1) Warnings
This manual contains important information regarding safety. Before you
start installing the components, it is important that you read all the infor-
mation contained herein. Store this manual safely for future use.
Due to the dangers which may arise during both the installation and use
of the ROAD200, installation must be carried out in full respect of the
laws, provisions and rules currently in force in order to ensure maximum
safety. This chapter provides details of general warnings. Other, more
specific warnings are detailed in Chapters "3.1 Preliminary Checks" and
"5 Testing and Commissioning".
!
According to the most recent European legislation, the
production of automatic doors or gates is governed by the
provisions listed in Directive 98/37/CE (Machine Directive)
and, more specifically, to provisions: EN 12445, EN 12453 and
EN 12635, which enable manufacturers to declare the pre-
sumed conformity of the product.
Please access "www.niceforyou.com" for further information, and guide-
lines for risk analysis and how to draw up the Technical Documentation.
• This manual has been especially written for use by qualified fitters.
Except for the enclosed specification "Instructions and Warnings for
Users of the ROAD gearmotor" which is to be removed by the installer,
none of the information provided in this manual can be considered as
being of interest to end users!
• Any use or operation of ROAD200 which is not explicitly provided for in
these instructions is not permitted. Improper use may cause damage
and personal injury.
• Risk analysis must be carried out before starting installation, to include
the list of essential safety requisites provided for in Enclosure I of the
Machine Directive, indicating the relative solutions employed. N.B.
2) Product description and applications
ROAD200 is an electromechanical gearmotor used to automate slid-
ing gates for residential use. It has an electronic control unit and
receiver for radio control devices.
1
Risk analysis is one of the documents included in the "Technical Docu-
mentation" for this automation.
• Check whether additional devices are needed to complete the automa-
tion with ROAD200 based on the specific application requirements and
dangers present; for example, risk of impact, crushing, shearing and
dragging etc must be taken into consideration as well as other general
dangers.
• Do not modify any components unless such action is specified in this
manual. Operations of this type are likely to lead to malfunctions. NICE
disclaims any liability for damage resulting from modified products.
• During installation and use, ensure that solid objects or liquids do not
penetrate inside the control unit or other open devices. If necessary,
please contact the NICE customer service department; the use of
ROAD200 in these conditions can be dangerous.
• The automation system must not be used until it has been commis-
sioned as described in chapter 5: " Testing and commissioning".
• The packing materials of ROAD200 must be disposed of in compliance
with local regulations.
• If a fault occurs that cannot be solved using the information provided in
this manual, refer to the NICE customer service department.
• In the event that any automatic switches are tripped or fuses blown, you
must identify the fault and eliminate it before resetting the switches or
replacing fuses.
• Disconnect all the power supply circuits before accessing the terminals
inside the ROAD200 cover. If the disconnection device is not identifiable,
post the following sign on it: "WARNING: MAINTENANCE WORK IN
PROGRESS".
ROAD200 operates with electric power. In the event of a power fail-
ure, the gearmotor can be released using a suitable key in order to
move the gate manually.
277
330
GB
85
195
3