11
SAFETY
11.1
Intended use oft he machine
Use the machine only if it is in perfect technical condition and in accordance with its intended
purpose, safety and hazard awareness! Immediately rectify any malfunctions which could impair
safety!
It is generally forbidden to change or make ineffective the safety equipment of the machine!
The machine is intended exclusively for the following activities: Woodturning.
HOLZMANN-MASCHINEN accepts no responsibility or warranty for any other use or any thereof
resulting damage to property or injury.
Environmental conditions:
The machine is designed for use under the following conditions:
Unauthorized use:
-
Operation of the machine outdoors.
-
Any modification of the construction of the machine.
-
Dismantling or switching off the guards.
-
The operation of the machine without the provided safety devices.
-
Operation of the machine under fire or explosion hazard conditions.
-
Modifying or rendering ineffective the safety equipment of the machine.
11.2
Safety instructions
Warning signs and/or stickers on the machine that are illegible or have been removed
must be replaced immediately!
Local laws and regulations may determine the minimum age of the operator and limit
the use of this machine!
To avoid malfunctions, damages and health impairments, the following measures for safe
working must also be observed unconditionally:
-
Choose a level, vibration-free surface for installation.
-
Keep the working area and floor around the machine clean and free of oil, grease and
material residues".
-
Ensure adequate lighting conditions at the workplace.
-
Never leave the running machine unattended. Ensure that unauthorised persons are only
at an appropriate safety distance from the machine and, in particular, keep children away
from the machine completely.
-
Wear suitable work clothes (no loose clothing, ties, jewellery, etc.) - danger of catching in!
-
Wood dust can cause diseases (e.g. skin, respiratory diseases, allergic reactions). Protect
yourself by wearing suitable personal protective equipment (hearing protection, safety
goggles, fine dust mask, safety shoes, etc.).
-
Do not work on the machine in case of fatigue, lack of concentration or under the influence
of medication, alcohol or drugs!
-
Before switching on the machine, check that no adjusting wrenches or wrenches are left
in/on the machine.
-
Keep the device away from potential ignition sources, such as control lamps and/or naked
flames (fire and explosion hazard).
-
Make sure that the mains switch is in the "Off" position before connecting the machine to
the mains.
-
Make sure that the device is earthed.
-
Use only suitable extension cables.
-
Switch off the unit before changing, cleaning, maintenance or repair work, disconnect it
from the mains and protect it from being switched on again unintentionally.
-
Use only intact tools.
-
If dust extraction equipment is intended, make sure it is properly connected and used.
HOLZMANN MASCHINEN GmbH
Rel. Humidity:
Temperature
www.holzmann-maschinen.at
max. 70 %
von +10° C bis +40° C
SAFETY
23
VD 1100N