Ducati MONSTERS4R Manuel De L'utilisateur page 128

All manuals and user guides at all-guides.com
Replacing bulbs
Before replacing a burnt-out bulb, make sure that the
new one complies with voltage and wattage as specified
on page 70 - "Electric System".
Headlight (fig. 54)
To facilitate headlight servicing, it is advisable to remove
1
the headlight fairing, as indicated in "Removing the
headlight fairing" on page 44.
To gain access to headlamp bulbs, slacken the lower
E
screw (1) holding the rim-reflector assembly to the bulb
body and disconnect the connector (2, fig. 55) from the
headlamp. Release the clip (3, fig. 55) that secures the
bulb and remove it from the socket.
fig. 54
3 2
fig. 55
53