Ducati MONSTERS4R Manuel De L'utilisateur page 124

Checking brake pads for wear (fig. 49)
Front brake
To facilitate inspection without removing the pads from
the calipers, brake pads have a wear mark. If the grooves
in the friction material are still visible, the pad is still in
good condition.
Rear brake
Friction material on each pad must be at least 1 mm
thick.
Important
Have the brake pads replaced at your Ducati
dealer's shop or authorized workshop.
Throttle cable adjustment
The throttle twistgrip must have a free play of 2 - 4 mm,
measured at the edge of the twistgrip and at all positions
of the handlebars. If it needs adjusting, use the suitable
adjuster (1, fig. 50) provided on the throttle control.
All manuals and user guides at all-guides.com
➤
1
fig. 49 1 mm
fig. 50
49
E