DIRECTIONS FOR USE
Running-in recommendations (fig. 28)
E
Important
During the whole running-in period, the
maintenance and service rules recommended in the
Warranty Card should be observed carefully.
Compliance with the above instructions is a prerequisite
for Warranty validity. Failure to comply with these rules
will release Ducati Motor Holding S.p.A. from any liability
whatsoever for resulting engine damage or shorter
engine life.
Max. rotation speed
Rotation speed for running-in period and during standard
use (rpm):
1) up to 1000 km;
2) from 1000 to 2500 km;
3) after 2500 km.
34
All manuals and user guides at all-guides.com
Up to 1000 km
During the first 1000 km, keep the revolution meter
under control. The indicator must not exceed:
6000 rpm.
During the first hours of riding, it is advisable to run the
engine at varying load and rpm, though still within
recommended limit.
To this end, roads with plenty of bends and even slightly
hilly areas are ideal for a most efficient running-in of
engine, brakes and suspensions.
For the first 100 km, use the brakes gently. Do not brake
violently or keep brake applied for too long. This will
enable a correct break-in of friction material on brake
pads against brake discs.
For all mechanical parts of the motorcycle to adapt to
one another and above all not to adversely affect the life
of basic engine parts, it is advisable to avoid harsh
accelerations and not to run the engine at high rpm for
too long, especially uphill.
Furthermore, the drive chain should be inspected
frequently. Lubricate it as required.