Publicité
Les langues disponibles
Les langues disponibles
2) Move the fast-idle lever to position (B) (fig. 33).
3) Check that the stop switch (1, fig. 34) is positioned to
(RUN), then press the starter button (2).
Let the engine start without using the throttle control.
This model is equipped with a servoignition system.
To achieve assisted engine starting, press the button (2)
and release it immediately.
Pressing the button (2) operates automatic engine
E
starting for a maximum period of time that varies
depending on engine temperature.
When the engine has started, the system prevents the
starter motor from turning over.
If the engine fails to start, allow at least 2 seconds before
pressing the starter button (2) again.
Note
If the battery is flat, the system will automatically
prevent the starter motor from turning over.
4) Move the fast-idle lever towards its vertical position
(A, fig. 33) until obtaining an engine speed of approx.
1400-1500 rpm.
38
All manuals and user guides at all-guides.com
1
2
A
B
fig. 33
fig. 34
Publicité
