Bose VIDEOBAR VB1 Mode D'emploi page 46

Problem
The camera zooms in
or out even when I am
not manually adjusting
it.
The Bluetooth
indicator is blinking
blue.
The Bluetooth
indicator is lit solid
white.
The light bar is on.
A small section of
lights in the center of
the light bar is lit solid
green.
TR OUBL ES H O OTI N G
What to Do
The camera's autoframing feature may be
enabled. Press the Autoframe button on the
remote control to disable it.
Some meeting software apps have built-in
autoframing, which may be cropping the image
or changing the camera zoom ratio. If possible,
disable this feature in your meeting software.
This is normal. This indicates the VB1 is in
Bluetooth pairing mode (The Bluetooth button
on the side of the VB1 or on the remote control
may have been accidentally pressed.)
This is normal. This indicates the VB1 is
connected to a Bluetooth mobile device for
music or calls or to the Videobar Mobile app.
If the whole light bar is lit, then there is an active
meeting.
If only a small section of lights is on, then there
is no active meeting. The VB1 is simply powered
on. See Light Bar (Page 31) for more
information.
This is normal. This indicates the VB1 camera is
on. (If the other lights in the light bar are solid
white, then there is an active meeting. If the
other lights in the light bar are off, then there is
no active meeting.)
|
4 6 E N